Moissanite earrings lose visible sparkle when skin oils, lotion, makeup, and hair products collect on the stone and beneath its setting. Fortunately, routine cleaning is simple: warm water, mild dish soap, a very soft brush, and a lint-free cloth are usually enough.
The method below is designed for ordinary at-home care. If an earring has a loose stone, bent post, damaged plating, pearl accents, glued components, or an unknown material, pause and ask a jeweler before cleaning.
What You Need

- A small bowl
- Warm—not hot—water
- A few drops of mild dish soap
- A clean, very soft toothbrush or jewelry brush
- A second bowl of clean rinse water
- A lint-free cloth
Clean on a stable, well-lit surface. Close nearby drains or, better yet, keep the entire process away from the sink. Tiny studs and backs disappear remarkably fast when gravity gets ideas.
How to Clean Moissanite Earrings Step by Step
1. Inspect the earrings
Check the stone, prongs, post, and backing. Do not scrub a piece with a loose stone or visibly lifted prong. Set it aside for professional inspection.
2. Prepare a mild solution
Mix warm water with a few drops of mild dish soap. Avoid boiling water and sudden temperature changes.
3. Soak briefly
Place the earrings and removable backs in the bowl for about 10 to 15 minutes. This loosens ordinary oily residue. Keep pairs and components together so backs are not mixed up.
4. Brush gently
Support the earring over the bowl and brush with light pressure. Pay attention to the underside of the moissanite, the basket, the post, and the backing. Those hidden surfaces often cause a stone to look dull.

5. Rinse safely
Rinse in a separate bowl of clean water. Do not hold a small stud over an open drain. Check that no soap remains around the prongs or under the stone.
6. Dry and recheck
Pat dry with a lint-free cloth, then allow the earrings to air-dry fully. Inspect the setting once more before wearing. A clean piece makes movement or damage easier to notice.
What Not to Use
Avoid bleach, chlorine, abrasive powders, toothpaste, and stiff brushes. Toothpaste can contain abrasives that scratch metal even when the gemstone itself is hard. Do not assume every commercial jewelry cleaner is appropriate for every alloy or plating; follow its label and the jewelry maker’s instructions.
Ultrasonic and steam cleaners can be unsuitable for damaged settings, treated components, glued elements, or mixed-material designs. Ask a professional jeweler before using either method.
How Often Should You Clean Moissanite Earrings?
Clean when you notice film, reduced sparkle, or product buildup. Frequently worn studs may benefit from a gentle cleaning every few weeks, while occasional pieces need less. Wiping posts and backs after wear can reduce accumulation between deeper cleanings.
Keep Earrings Cleaner Between Washes
- Put earrings on after lotion, perfume, hairspray, and makeup.
- Remove them before swimming, showering, or using household chemicals.
- Handle stones by the edges rather than touching the face.
- Store clean, dry earrings in separate compartments.

For sterling silver earrings, a dry anti-tarnish storage environment can also help slow discoloration. Keep each stud paired with its correct backing and avoid tossing pieces loose into a crowded jewelry box.
When to See a Jeweler
Professional help is appropriate when a stone moves, a prong lifts, a post bends, a closure stops engaging, or discoloration persists after gentle cleaning. A jeweler can inspect areas that are difficult to evaluate at home and advise whether refinishing or repair is appropriate.
Frequently Asked Questions
Can I clean moissanite earrings with vinegar?
Mild soap and water are the safer default because vinegar may react with certain metals, finishes, or mixed materials.
Can I use toothpaste on moissanite?
Do not use toothpaste. Its abrasives may damage the metal or finish around the stone.
Why do my moissanite earrings look cloudy?
Surface oils, soap, and cosmetics commonly create a dull film. Clean the top and underside gently. If the appearance persists, ask a jeweler to inspect the piece.
Can moissanite earrings go in an ultrasonic cleaner?
Only if a professional or the jewelry maker confirms that the complete piece—stone, setting, plating, and any additional materials—is suitable.
Restore the Sparkle Gently
Regular mild cleaning works better than aggressive treatment after heavy buildup. Inspect first, clean over a bowl, use minimal pressure, and dry completely. For broader guidance, bookmark the VEZENY jewelry care guide or browse our moissanite earrings.